Tolva by Daniel Evans
AI powered Ouija board in the form of a 6-sided puzzle-piece box with Ouija board engraved into the top. The box had cutouts for sensors and controls, and contained an arduino and various other microelectronics. ...
AI powered Ouija board in the form of a 6-sided puzzle-piece box with Ouija board engraved into the top. The box had cutouts for sensors and controls, and contained an arduino and various other microelectronics. ...
Casting plexiglass prototypes of the word “Sweetie” to be cast into candy with silicone molds and then used in a performance video piece. The word sweetie was cast into candy as a medium because it ...
beauty sleep explores the complex issue of forced intimacy on sick and disabled bodies in social space. The soft folds of a down-filled blanket are etched into cotton rag paper, resting on top is intersecting ...
Developed for a research presentation in HADVC 503, Hogarth Crip Quilt explores the early modern construction of the disabled body through historical sources. Replicating the familiar form of a convalescence quilt, each tile explores the ...
The Pines is an artist book exploring the labour and trauma of recovery from surgical intervention. Designed to fit in the viewer’s hand, this project constructs an intimate relationship through its delicate materiality. The waxed ...
The project consists of two rugs constructed from artificial turf each measuring 20” x 60”. The pattern is created from a google maps screenshot of the orangerie garden in the Palace of Versaille. The original ...
Laser engraved into battleship linoleum with reduction hand linocut, printed on offset press. Line work image created in Illustrator. Settings used: 250 dpi Image: Power=100, Velocity=35, PPI=750, 2 Passes
I wanted to showcase the performativity of the action of eating rice continuously with the chopsticks and mark the aftermath of that action onto the chopsticks in photographic clarity to best exhibit the raw documentation. ...
A series of homemade pancakes, lasercut with imagery depicting or relating to the cooking process. The engraved pancakes were also subsequently used as a relief printing matrix. The project explored conceptual analogues between the cooking ...
A teapot, 4 cups and 4 plates were digitally constructed through 3D modelling software, and unfolded into a flat plane, resulting in a series of polygons that could be folded back into a paper tea set. A pattern from the original tea set was digitally scanned and translated into a black and white image that was then transposed onto the polygons.
Obscene Echo, laser engraved graphite on Somerset Satin 2019. Composite image of volume rendered MRI scan data in virtual reality and meshed model generated from CT data laser engraved into graphite covered Somerset stain
On Fire by Marilene Oliver 2019, three colour woodblock print (RGB) on gampi. I wanted to explore the noise of the woodgrain with this rendering of MR data which is also very noisy.
Cutting woodblock outlines of internal organs, three-quarter inch Baltic birch plywood.
I made a series of digital drawings that I wanted to engrave into paper. I tested the settings until I found one that would go almost all the way through the paper but not quite. The colour of the paper when touched by the laser was darker. Based on these pieces, I decided to use some of the pieces that I made as part of a large wall collage that also incorporated fine paper grids that I cut using the laser.
Thistles by Holly de Moissac, 2018. Cut outlines of thistles into thick paper, to be tangled into larger forms, rough, handmade paper (approx. 150-200 gsm), with an uneven surface.
Extractive Logics (leaves) by Daniel Evans, 2020, Rives BFK (Grey) with compressed charcoal rubbed into it. Series of photographs laser-engraved into charcoal saturated paper, with leaf surface texture subsequently engraved over top
Extractive Logics, 2020, Rives BFK (Grey) with compressed charcoal rubbed into it. Additional hand drawing with black and white conte. A series of charcoal works combining hand-drawn imagery with laser engraved photographs.
Laser cut coroplast figures by Marilene Oliver. Cutting paths created in Rhino (using Section tools to create cross sections from a 3D model) and then exported to Illustrator. Cutting settings P100, speed 0.8. NB focus ...