On Fire by Marilene Oliver
On Fire by Marilene Oliver 2019, three colour woodblock print (RGB) on gampi. I wanted to explore the noise of the woodgrain with this rendering of MR data which is also very noisy.
MATERIAL: ½ inch plywood
CUTTING/ENGRAVING TIME: 30 minutes per block
FILE PREPARATION: The image is a volume rendering of MR scan data. The RGB image was split into 3 colour channels using photoshop, resized to 333dpi.
SETTINGS USED: Standard Baltic birch settings were used, engraved once with a stucki dither.
Notes – a hard roller was used to ink up the block and it printed bests on thin gampi. In future best to engrave twice.
IMAGE OF FINAL PROJECT: