Tolva by Daniel Evans
AI powered Ouija board in the form of a 6-sided puzzle-piece box with Ouija board engraved into the top. The box had cutouts for sensors and controls, and contained an arduino and various other microelectronics. ...
Laser engraved
Beauty Sleep by Chelsey Campbell
beauty sleep explores the complex issue of forced intimacy on sick and disabled bodies in social space. The soft folds of a down-filled blanket are etched into cotton rag paper, resting on top is intersecting ...
Hogarth Crip Quilt by Chelsey Campbell
Developed for a research presentation in HADVC 503, Hogarth Crip Quilt explores the early modern construction of the disabled body through historical sources. Replicating the familiar form of a convalescence quilt, each tile explores the ...
The Pines by Chelsey Campbell
The Pines is an artist book exploring the labour and trauma of recovery from surgical intervention. Designed to fit in the viewer’s hand, this project constructs an intimate relationship through its delicate materiality. The waxed ...
The Fury by Marilene Oliver
Laser engraved into battleship linoleum with reduction hand linocut, printed on offset press. Line work image created in Illustrator. Settings used: 250 dpi Image: Power=100, Velocity=35, PPI=750, 2 Passes
Bing by Yilu Xing
A series of homemade pancakes, lasercut with imagery depicting or relating to the cooking process. The engraved pancakes were also subsequently used as a relief printing matrix. The project explored conceptual analogues between the cooking ...
Paper Plates by Heather Savard
A teapot, 4 cups and 4 plates were digitally constructed through 3D modelling software, and unfolded into a flat plane, resulting in a series of polygons that could be folded back into a paper tea set. A pattern from the original tea set was digitally scanned and translated into a black and white image that was then transposed onto the polygons.
Obscene Echo by Marilene Oliver
Obscene Echo, laser engraved graphite on Somerset Satin 2019. Composite image of volume rendered MRI scan data in virtual reality and meshed model generated from CT data laser engraved into graphite covered Somerset stain
On Fire by Marilene Oliver
On Fire by Marilene Oliver 2019, three colour woodblock print (RGB) on gampi. I wanted to explore the noise of the woodgrain with this rendering of MR data which is also very noisy.
Paper installation by Kim McCollum
I made a series of digital drawings that I wanted to engrave into paper. I tested the settings until I found one that would go almost all the way through the paper but not quite. The colour of the paper when touched by the laser was darker. Based on these pieces, I decided to use some of the pieces that I made as part of a large wall collage that also incorporated fine paper grids that I cut using the laser.